• Call Us:
    +66(0) 2 730 6500
  • Email:
    info@brasten.com
Get A Quote

Testomat 808 SILICA

  • Home
  • Testomat 808 SILICA

Online Analyzer for Limit Value Detection

The Testomat® 808 SiO2 has been designed for use in the sterilisation of equipment in hospitals. It complies with the EN 285:2006 standard. The device is a limit gauge that automatically monitors the level of SiO2 in the water. It gives you the choice between 10 limits in the range of 0.3 to 1.2 ppm.

Applications:

  1. sterilization of equipment in hospitals
  2. silica monitoring

Measuring range:

Silica SiO2: 0.3 – 1.2 ppm

WATER SUPPLY

  • Operating pressure:
    4.4 – 58 psi (option to add a pressure reducer for pressure over 58)
  • Water inlet: 1/4-in inlet fitting
  • Water outlet: Opaque hose with an internal diameter of 0.55 inch
  • Water temperature: 50 to 104 °F (a cooler can be installed for temperatures above 104°F)

TECHNICAL DATA

  • Power supply: 24 / 115 / 230 VAC, 50 – 60 Hz
  • Power consumption: Max. 16 V without external load
  • Current Interface Card: Not available
  • Protection class: I
  • Degree of protection: IP 44
  • Ambient temperature: 50 – 104°F
  • Dimensions: (W x H x D): 14.3 x 12.4 x 5.4 inch
  • Weight: 9.59 lb

INNOVATIONS

• Measuring chamber flushed with pressure FOR SILICA UP TO 1.2 PPM
• Low water consumption
• Cutting-edge electronics
• State-of-the-art indicator pump system
• Direct error and indicator quantity display
• Quality management with 2 relay outputs
• Limit value evaluation / External control
• Alarm processing
• Internal flushing via manual control
• 72 hours of unsupervised operation possible
• Selection between two indicator bottle sizes
• Two selector switches for interval measurement
and limit value evaluation

AVAILABLE INDICATORS

Reagents Art. no. 100 ml bottle Art. no. 500 ml bottle
Testomat® 808 SiO2 reagent set, reagents A + B 140808 –
Testomat® 808 SiO2 reagent A – 141808
Testomat® 808 SiO2 reagent B – 141808

PERFORMANCE SPECIFICATIONS

The Testomat® 808 SiO2 equipment has been
designed for use in the sterilisation of hospitals. The device is a limit gauge that automatically monitors the level of SiO2
in the water. It
complies with the EN 285:2006 standard for
steam sterilizers.
The device is also suited in other industries for
product monitoring due to its adjustable measuring range.

Overview of functions:

• Selection of 10 limit values from 0.3 to
1.2 ppm
• Automatic interval mode
interval pause can be set from
0 – 480 minutes
• External control (quit alarms,
stop analysis)
• Manual start
• Extended operating periods due to 500 ml
indicator storage bottle
• RS232 interface for optional firmware update
and data output to the computer
• Weekend operation monitoring through 72-
hour operation without supervision (BOB)
• Status and error messages output via a
current loop