The “smart” Digital CS7 sensor stores calibration and history data within the sensor. This allows you a “plug and play” system without re-calibration.
Thanks to the Universal Modbus RS485 protocol, the Digital CS7 can be connected to all devices commonly used (Datalogger, Controller, Automat, Remote System…).
Urban wastewater treatment
The “smart” Digital CS7 sensor stores calibration and history data within the sensor. This allows you a “plug and play” system without re-calibration.
Thanks to the Universal Modbus RS485 protocol, the Digital CS7 can be connected to all devices commonly used (Datalogger, Controller, Automat, Remote System…).
CS7 | |
Measure principle | Conductivity sensor with 2 or 4 electrodes |
Conductivity Range | 0 – 200 µS/cm 0 – 2000 µS/cm 0 – 20 mS/cm (Two electrodes for ground water, constant: 0.4 – 0.7) 0 – 200 mS/cm (Four electrodes, constant: 1) |
Resolution | 0.01 |
Accuracy | ±1% |
Salinity Range | 5-60g/kg |
Response Time | < 5 s |
Operate Temp | 0 – 50°C |
Store Temp. | -10 – 60°C |
Protection | IP68 |
Pressure | 5bar |
Weight | 0.45kg(Sensor & 3 meters cable) |
Material | PVC, Stainless Steel, POM |
Connection | 9 armored connectors, polyurethane jacket, bare-wires or waterproof Fisher connector |
Signal Interface | Modbus RS485 (Option SDI-12) |
Power | 5~12VDC |
Electric Consumption | Standby 25μA Average RS485(1 measure/s): 6.3mA Average SDI12 (1 measure/s) : 9,2 mA Current pulse: 500 mA |