- Call Us:
+66(0) 2 730 6500
- Email:
info@brasten.com
BAC - SERIES MULTIPARAMETER CONTROLLER
Multiparameter Controller – BAC Series
The Brasten BAC Series dual-input transmitter offers single or dual sensor input with an unrestricted choice of dual measurements thus reducing the cost per loop and saving panel space. This dual-parameter instrument offers a wide range of measurement choices, including pH, ORP, conductivity, turbidity and many other combinations supporting most industrial, commercial, and municipal applications. The modular design of the instrument allows signal input boards to be field replaced making configuration changes easy.
THE ADVANTAGE
- Universal Terminals: Use with BAS Smart Sensors for measurements of a variety of different parameters
- Advanced Display: 40 C tolerance brighter OLED screen
- Multiple Channels: Simultaneous Acquisition one or two sensors for BAC 01(single channel) or BAC 02(dual channel)
- 4 20 mA output with Optional HART and Alarm Relays: Flexible configurations for all applications
INTRODUCTION
DIMENSION
Brasten’s BAC Multiparameter controller series terminals are designed for continuous measurements with BAS Smart Sensors in both general purpose industrial or municipal environments Our BAC Controller terminals have the ability to connect to network via intelligent sensors with RS 485 output or Modbus RTU protocol The BAC controller terminals supply power to sensors while simultaneously receiving probe input Our plug and play function seamlessly connects to all sensors in our recommended list which means by plugging an intelligent sensor into a BAC controller will result in automatic configuration
INDUSTRIES SERVED
- Oil & Gas
- Petrochemical Chemical
- Textile
- Pharmaceutical
- Pulp & Paper
- Food & Beverages
- Power plants
- Water Treatment
STANDARD WARRANTY
Standard warranty is 12 months from the date of commissioning limited to a maximum of 15 months from the date of shipment of the analyzer system
SPECIFICATION
- Possible parameters: Up to 8
- Accuracy: ±0.1%Full scale
- Repeatability: ±0.1%Full scale
- Linearity: ±0.05%Full scale
- Response time: T90 < 1s
- Power:
DC: 24VDC (13 ~ 50VDC)
AC: 110VAC/ 220VAC, 50Hz/ 60Hz - Display: LCD touch screen
- Temperature: -20 ~ 70 C
- Humidity: 0 ~ 95 % RH
- Inputs
Analog input : 4~20mA,
Digital input: RS 485 MODBUS RTU - Analog Output: 4-20mA, Up to 8 channels
- Digital output: RS485 MODBUS
- Relay: SPDT,5A@250VAC/5A@30VDC (option)
- IP Ratings: IP 65
SALES & SERVICE SUPPORT
- Factory Acceptance Test (FAT)
- Site Acceptance Test (SAT)
- Site Commissioning
- After Sales Service backup
- Guaranteed spares parts availability for maximum 10 years of instrument life
ORDERING INFORMATION
- BA Series: Multiparameter controller
- 04/06/08:
04 – Four channel
06 – Six Channel
08 – Eight Channel - Output:
BH – HART
PB – Profibus DP
MB – RS485 Modbus - Relays:
R2 – Two SPDT Relays
R4 – Four SPDT Relays - Power Supply:
AC – 110/230 VAL
DC – 24 VDC
THE ADVANTAGE
Universal Terminals: Use with BAS-Smart Sensors for measurements of water analyzing
Advanced Display: -40°C tolerance brighter OLED screen
4-20 mA output with Optional HART and Alarm Relays: Flexible configurations for all applications
Explosion-Proof NEMA 4X, IP66
INTRODUCTION
DIMENSION
BAC-EX are designed for continuous measurements with BASSmart Sensors in both general purpose industrial or municipal environments. Our BAC –EX have the ability to connect to network via intelligent sensors with RS485 output or Modbus RTU protocol. The BAC controller terminals supply power to sensors while simultaneously receiving probe input. Our plug and play function seamlessly connects to all sensors in our recommended list. which means by plugging an intelligent sensor into a BAC controller will result in automatic configuration.
BAC-EX explosion-proof allow it to be programmed without removing the cover, making it easy and economical to change batch sizes in the hazardous area
INDUSTRIES SERVED
- Oil & Gas
- Petrochemical Chemical
- Textile
- Pharmaceutical
- Pulp & Paper
- Food & Beverages
- Power plants
- Water Treatment
STANDARD WARRANTY
Standard warranty is 12 months from the date of commissioning limited to a maximum of 15 months from the date of shipment of the analyzer system
SPECIFICATION
- Possible parameters: O1/ 02
- Accuracy: ±0.1%Full scale
- Repeatability: ±0.1%Full scale
- Linearity: ±0.05%Full scale
- Response time: T90 < 1s
- Power:
DC: 24VDC (13 ~ 50VDC)
AC: 110VAC/ 220VAC, 50Hz/ 60Hz - Display: LCD touch screen
- Temperature: -20 ~ 70 C
- Humidity: 0 ~ 95 % RH
- Inputs
Analog input : 4~20mA,
Digital input: RS 485 MODBUS RTU - Analog Output: 4-20mA, Up to 8 channels
- Digital output: RS485 MODBUS
- Relay: SPDT,5A@250VAC/5A@30VDC (option)
- IP Ratings: IP 66
SALES & SERVICE SUPPORT
- Factory Acceptance Test (FAT)
- Site Acceptance Test (SAT)
- Site Commissioning
- After Sales Service backup
- Guaranteed spares parts availability for maximum 10 years of instrument life
ORDERING INFORMATION
- BAC-Ex: Ex-proof controller
- 01/02:
01 – Single channel
02 – Dual Channel - Output:
BH – HART
PB – Profibus DP
MB – RS485 Modbus - Relays:
DO – Done
R1 – One SPDT Reply - Power Supply:
AC – 110/230 VAL
DC – 24 VDC
Deprecated: str_replace(): Passing null to parameter #3 ($subject) of type array|string is deprecated in /home1/brastvxa/public_html/wp-content/themes/buliten/includes/library/functions.php on line 436