- Call Us:
+66(0) 2 730 6500
- Email:
info@brasten.com
Total Nitrogen & Total Phosphorus Analyzer
Wet Chemistry Analyzer – Hydrazine Analyzer, Total Phosphorous, Total Nitrogen Analyzer
The Advantage
- Automatic Calibration/ Validation/ Cleaning (Application Dependent).
- Automatic High Sensitivity and Selectivity.
- Higher measuring ranges possible by using Dilution.
- Multiple streams analysis (optionally).
- Increased lifespan by adopting corrosion resistant material.
- Solid state Data logger with storage capacity of up to 10,000 results.
- Large (7.1" Color LCD Display).
- Low reagent consumption.
- Factory configured, tested & calibration.
Introduction
The Online Wet Chemistry Analyzer is a single parameter versatile, robust suitable for analysis of water, wastewater & process liquids.
For each application & measuring range the most suitable methodology is applied in BA-Enviro. The Online Wet Chemistry Analyzer is a single parameter versatile, robust suitable for analysis of wastewater & process liquids.
For each application & measuring range the most suitable methodology is applied in BA-Enviro.
Analyzer Methods
- Titration
- Colorimetric
- Ion-Selective
Sepecification
General Specification |
|
|---|---|
| Parameters | As listed below or customized on request |
| Measuring ranges | μg/L to g/L |
| Analysis Method | – Titration – Colorimetric – Ion-Selective |
| Inaccuracy | 1 -5% of Full scale (Application dependent) |
| Repeatability | 1 – 5% of Full scale (Application dependent) |
| Cycle Time | 1 cycle: 08 – 30 minutes (Application dependent) |
| Display | 7.1" LCD Colour touch screen/10" (optional) |
| Communication & Control | |
| Data logging | Available up to 10,000 |
| Analog inputs | Max 8 x Al |
| Digital Inputs (programmable) | Max 12 x Dl (Poten free) |
| Digital Outputs (Programmable) | Max. 8 x DO (Poten free) – Malfunctioing Alarm – Result Alarm – Ext. control; Pump, value or light etc. |
| Modbus/RS485 | Optional |
Utilities & Environment |
|
|---|---|
| Power | 115 / 230 VAC, 50-60Hz |
| Instrument Air | Dry & oil free, up to 3 bar |
| Demin water | For Cleaning, rinsing & Dilution (if required) |
| Drain | Atmospheric pressure, vented |
| Ambient Temp. | 5 oC – 35 oC, 95% RH (Non condensing) |
| Reagent Temp. | Reagent Temp. |
| Sample Pressure | Atmospheric |
| Sample flow rate | 10 – 40 ml per minute |
| Analyzer Cabinet | |
| IP Ratings | Cabinet – IP 55 (Other options available) |
| Cabinet material | ABS / Polycarbonate ( Stainless steel on request) |
| Dimensions | 600mm X 500mm X 200mm (H X W X D) |
| Weight | Approx. 15 kg (w/o reagents) |
| Options | |
| Filtration | Self-cleaning filtration (different pore sizes) |
| Dilution | Internal Sample Dilution for high measuring ranges |
| Reagent Level Detection | For reagent container, early Alarm of reagents qty. |
| Multiplexer for Multi streams | Stream Selector (build in program (2 – 4 streams) |
Parameter List
General Specification |
||
|---|---|---|
| Parameters | Measuring range | Methodology |
| Acetic Acid | Up to 2000 mg/l | Titration |
| Acidity | Up to 5000 mg/l | Titration |
| Alkalinity | Up to 5000 mg/l | Titration |
| Aluminum | Up to 300 ug/l | Colorimetric |
| Ammonia | 0 – 2.5 mg/l | Colorimetric |
| Ammonia | 0 – 1000 mg/l | Ion-Selective |
| Boron | 0 – 1 mg/l | Colorimetric |
| Bromide | 0.5 – 5 mg/l | Colorimetric |
| Calcium | 1 – 1000 mg/l | Colorimetric |
| Chlorine Free | 0 – 5 mg/l | Coloriemtric |
| Chlorine Total | 0 – 5 mg/l | Coloriemtric |
| Chlorine Dioxide | 0 – 5 mg/l | Coloriemtric |
| Chromium III | 0 – 1 mg/l | Coloriemtric |
| Chromium Total | 0 – 2 mg/l | Coloriemtric |
| Chloride | Up to 1000 mg/l | Ion-Selective |
| Chloride | Up to 50 mg/l | Colorimetric, Ion-Selective |
| Cyanie | 0 – 5 mg/l | Colorimetric, Ion-Selective |
| Cyanide Total | 0 – 5 mg/l | Colorietric |
| Chemical Oxygen Demand (CODcr) | Up to 1500 mg/l | Titration, Colorimetric |
| Chemical Oxygen Demand (CODMn) | Up to 200 mg/l | Titration |
| Chemical Oxygen Demand (CODcr+Ammonia) | CODcr: 0 -1000 mg/l, NH3: 0-10 mg/l | Colorimetric |
| Fluoride | Up to 1000 mg/l | Ion-Selective |
| Hardness | Up to 1000 mg/l | Ion-Selective |
| Hydrazine | 0 – 500 ug/l | Colorimetric |
| Hydrochloric acid | 0 – 5000 ug/l | Titration |
| Hydrochloric fluoride | 0 – 5000 ug/l | Titration |
Utilities & Environment |
||
|---|---|---|
| Hydrogen peroxide | 0 – 2.5 mg/l | Colorimetric |
| Hypochlorite | Up to 1000 mg/l | Titration |
| Iron | Up to 5 mg/l | Colorimetric |
| Lactic acid | Up to 5000 mg/l | Titration |
| Manganese | 0 – 5 ug/l | Colorimetric |
| Nickel | 0 – 500 mg/l | Colorimetric |
| Nitrate | 0 – 1 – 20 mg/l | Colorimetric |
| Nitrite | 0 – 0.2 – 20 mg/l | Colorimetric |
| Nitric Acid | Up to 5000 mg/l | Titration |
| Nitrogen Total | 0 – 20 mg/l | Colorimetric |
| Phenol | 0 – 15 mg/l | Colorimetric |
| Phosphorus Total | 0 – 20 mg/l | Colorimetric |
| Phosphate | 0 – 15 mg/l | Colorimetric |
| Silica | 0 – 5 – 5 mg/l | Colorimetric |
| Sodium | 0 – 0.1 – 1 mg/l | Ion-Selective |
| Sodium hydroxide | Up to 5000 mg/l | Ion-Selective |
| Sulphate | 0 – 20 – 200 mg/l | Colorimetric |
| Sulphide | 0 – 2.5 mg/l | Colorimetric |
| Sulphite | 0 – 20 mg/l | Colorimetric |
| Sulphuric acide | Up to 5000 mg/l | Titration |
| Thiocyanate | 0 – 500 ug/l | Colorimetric |
| Total Acid | 0 – 5000 mg/l | Titration |
| Total Alkalinity | Up to 5000 mg/l | Ion-Selective |
| Total Nitrate (TN) | Up to 20 mg/l | Colorimetric |
| TMAH | Up to 5000 mg/l | Titration |
| Urea | 0 – 250 mg/l | Colorimetric |
| Zinc | 0 – 2 mg/l | Colorimetric |
Deprecated: str_replace(): Passing null to parameter #3 ($subject) of type array|string is deprecated in /home1/brastvxa/public_html/wp-content/themes/buliten/includes/library/functions.php on line 436